Our wide range of completion tools is designed to maximize oil production

• Open J-slot reduces debris build up
• Safety tubing release
• Wide wicker slips insure setting in scaly casing
• Available in single or double element design
• Automatic J-slot design for easy set and release.

• No rotation required to set.
• Adjustable to any length from one foot between packers.
• Inexpensive.
• Available in wide variety of materials.
• Premium threads available on request.

• Full bore design
• Tension or compression set
• Available with rotational safety release system
• Available in single or double element design
• Economical
• Easily convertible into liner hanger system

• The packer can be set in tension or compression depending on the application.
• It can be modified to be run on electric wireline using standard setting tools.
• It can also be supplied in a shear release configuration if needed.
• Standard setting and releasing methods incorporate a ¼ turn to the right at the tool.
• The internal by-pass equalizes pressure across the packer to reduce any tendency to swabbing.
• Use of the T-2 disconnect feature eliminates the need for expensive seal assemblies.
• Rated to 7,000psi at 300ºF with elevated temperature capabilities up to 425ºF with choice of appropriate elastomers.

• Suitable for single or multiple packer completions.
• All components are locked to prevent premature setting during run in.
• Set by hydraulic pressure from surface against a plug or ball and set below.
• Once set the release shear mechanism is unaffected by differential pressures.
• A pressure balanced system offsets pressure reversals.
• Released by a straight pull.

• Designed for use in vertical, deviated or horizontal well completion applications.
• Bi-directional slips prevent any movement after setting.
• An internal locking device maintains pack off.
• Retrieved by a straight pull shear release using a Forum Pack retrieving tool.
• Retrieving tool has an emergency shear release feature in the event that the packer does not release.
• Available with materials and elastomers suitable for standard or sour service.
• Rated at 10,000psi and up to 425˚F with Special Ecner Array elastomers.

• Electric line set, hydraulic set or mechanical set
• Components keyed for milling
• Anti-extrusion rings expand to casing I.D. to prevent rubber extrusion
• Designed to accommodate competitive seal bore accessories.
• Full circle slip allow for fast run time

• Hydraulic-set, by tubing pressure applied to a temporary plug set below the packer.
• No rotation is required to set.
• The anti-extrusion back-up rings expand to full casing I.D. to provide positive retention of the packing element.
• A larger diameter upper seal bore accepts an anchor seal assembly to maximize thru bore.
• Packing element options are available for high temperatures and H2S/CO2 applications.
• Seal materials such as Kalrez, Aflas, Viton, Teflon, Ryton, HNBR and Nitrile are available.

• Can be set on electric line or hydraulic setting tool.
• The anti-extrusion back-up rings expand to full casing I.D. to provide positive retention of the packing element.
• A larger diameter upper seal bore accepts an anchor seal assembly to maximize thru bore.
• Packing element options are available for high temperatures and H2S/CO2 applications.
• Seal materials such as Kalrez, Aflas, Viton, Teflon, Ryton, HNBR and Nitrile are available.

• Setting on electric wireline, using the combination of a power charge and a pressure setting assembly, enables the packer to be accurately located in the well by correlation with well logs.
• Allows placement of the packer in a much shorter time than tubular conveyed methods.
• Simple and fast installation process.
• Releasing the tubing from the packer requires only a ¼ turn at the packer.
• The seals are retained in the overshot rather than exposed as in standard seal assemblies.
• Available in sizes 4-1/2” thru 7” and a standard pressure rating of 10,000psi.
• Available for standard service with Nitrile packing elements.
• Available for sour service with an Aflas Ecner array packing element.
• Stinger can be supplied with a variety of profiles for landing plugs etc.
• Full circle slips allow for fast run in time.

The T-2 ON/OFF TOOL STINGERS are used to disconnect the tubing string from a packer. The stingers are used with the T-2 Overshot and are available in a variety of profile types, sizes and from a broad range of material types. 

• Fully field tested and proven bonded seal system
• Designed for strength and durability
• Stinger profile nipple can be supplied as specified by client.
• Available in metallurgy to suit standard, sour and high temperature applications.
• Can be supplied shear pinned in the up or down position
• As an alternative a spring loaded design is available.